Installation

2UR-FSE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

INSTALLATION





1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Install a new gasket to the sensor.
(b) Install the sensor.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(c) Connect the sensor connector.
2. ADD ENGINE COOLANT Service and Repair

3. INSPECT FOR COOLANT LEAK Testing and Inspection

4. INSTALL NO. 1 ENGINE UNDER COVER Installation

5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH Installation

6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH Installation

7. INSTALL NO. 1 AIR CLEANER INLET Installation

8. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

9. INSTALL V-BANK COVER SUB-ASSEMBLY Installation