Installation

2UR-FSE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION

INSTALLATION
HINT: When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. INSTALL VVT SENSOR






(a) Install the 4 sensors with the 4 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the 4 sensor connectors.
2. INSTALL AIR CLEANER ASSEMBLY RH Installation

3. INSTALL AIR CLEANER ASSEMBLY LH Installation

4. INSTALL NO. 1 AIR CLEANER INLET Installation

5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

6. INSTALL V-BANK COVER SUB-ASSEMBLY Installation