Removal

2UR-FSE INTAKE: INTAKE AIR CONTROL VALVE ACTUATOR: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Battery

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

4. REMOVE SERVICE PLUG GRIP Removal

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal







6. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR
(a) Disconnect the intake air control valve actuator connector.
(b) Remove the nut, and disconnect the actuator rod.
NOTE: When loosening the nut, hold the actuator rod in place so that it does not move.

(c) Remove the 2 bolts. Then remove the intake air control valve actuator from the intake manifold.