Installation

STEERING COLUMN: STEERING CONTROL ECU: INSTALLATION

INSTALLATION

1. INSTALL STEERING CONTROL ECU





(a) Install the ECU with the 3 screws.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
HINT:
- Securely attach the hook (B) of the ECU to the blower.
- Align the positioning boss (A) of the blower with the hole of the ECU.





(b) Connect the 3 ECU connectors.
2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

3. INSTALL SERVICE PLUG GRIP
4. INSTALL BATTERY SERVICE HOLE COVER Hybrid Battery Service Switch

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL BATTERY SERVICE HOLE COVER LH Battery

7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

8. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.
9. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
(a) Perform variable gear ratio steering system calibration Variable Gear Ratio Steering System.