Removal

SEAT BELT: CHILD RESTRAINT SEAT ANCHOR BRACKET: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Battery

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE REAR SEAT ASSEMBLY
(a) for Power Seat:
Remove the rear seat Removal.
(b) for Ottoman:
Remove the rear seat Removal.
(c) for Fixed Seat Type:
Remove the rear seat Removal.






5. REMOVE INNER CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY
(a) for Power Seat, for Fixed Seat Type:
Remove the 2 bolts and 2 anchor brackets.
(b) for Ottoman:
Remove the bolt and anchor bracket.
6. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY





(a) for Power Seat, for Fixed Seat Type:
Remove the 2 bolts and 2 anchor brackets.
(b) for Ottoman:





(1) for Driver Side:
Remove the bolt and anchor bracket.





(2) for Passenger Side:
Remove the 2 bolts and anchor bracket.