Component Tests and General Diagnostics

SEAT BELT: SEAT BELT WARNING SYSTEM: OPERATION CHECK

OPERATION CHECK

1. INSPECT DRIVER SIDE SEAT BELT WARNING LIGHT
(a) Turn the power switch ON (IG).
(b) When the driver seat belt is not fastened, check that the driver side seat belt warning light on the combination meter blinks.
(c) When the driver seat belt is fastened, check that the driver side seat belt warning light on the combination meter is off.
2. INSPECT FRONT PASSENGER SIDE SEAT BELT WARNING LIGHT
(a) Turn the power switch ON (IG).
(b) When the front passenger side seat belt is not fastened with the passenger seat occupied, check that the front passenger side seat belt warning light on the display and navigation assembly*1 (multi-display*2, *3) blinks.
HINT: *1: w/ Navigation System (for HDD)
*2: w/ Navigation System (for DVD)
*3: w/o Navigation System

(c) When the front passenger seat belt is fastened with the passenger seat occupied, check that the front passenger side seat belt warning light on the display and navigation assembly*1 (multi-display*2, *3) is off.
HINT: *1: w/ Navigation System (for HDD)
*2: w/ Navigation System (for DVD)
*3: w/o Navigation System

3. INSPECT SEAT BELT WARNING BUZZER
HINT: If the buzzer does not sound, the buzzer cancel setting may be set to ON Programming and Relearning.

(a) Turn the power switch ON (IG).
(b) When the vehicle is driven at approximately 20 km/h (12.5 mph) or more while the driver or front passenger seat belt is not fastened, check that the buzzer in the combination meter sounds at an interval of 1.2 seconds for 30 seconds.
(c) Check that the buzzer sounds at an interval of 0.4 seconds for 90 seconds.
(d) Check that the buzzer stops 2 minutes after the buzzer starts sounding.
(e) After the buzzer has stopped, turn the power switch OFF and then start the engine again. Drive the vehicle at approximately 20 km/h (12.5 mph) or more while the driver or front passenger seat belt is not being fastened, and then check that the buzzer sounds again.
(f) After the buzzer has stopped, fasten the driver and front passenger seat belts. Drive the vehicle at approximately 20 km/h (12.5 mph) or more and unfasten the driver or front passenger seat belt, and then check that the buzzer sounds again.
(g) After the buzzer has stopped, move the shift lever to the R position, and then move it to the D position. Drive the vehicle at approximately 20 km/h (12.5 mph) or more, and then check that the buzzer sounds again.