Power Shoulder Belt Anchorage System

SEAT BELT: POWER SHOULDER BELT ANCHORAGE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
- Use the following procedures to troubleshoot the power shoulder belt anchorage system.
- *: Use the intelligent tester or Techstream.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.
3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
(a) Use the intelligent tester or Techstream to check if the CAN communication system is functioning normally.

Result





B -- Go to CAN COMMUNICATION SYSTEM
A -- Continue to next step.
4. PROBLEM SYMPTOMS TABLE

Result





B -- Go to step 6
A -- Continue to next step.
5. OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Data List /Active Test Power Shoulder Belt Anchorage System

(b) Terminals of ECU Power Shoulder Belt Anchorage System

NEXT -- Continue to next step.
6. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
7. CONFIRMATION TEST
NEXT -- END