Seat Climate Control Switch (for Rear Side)

SEAT: SEAT CLIMATE CONTROL SWITCH (for Rear Side): INSPECTION

INSPECTION

1. INSPECT CURTAIN SWITCH ASSEMBLY





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the curtain switch assembly.
HINT: As the dial is being turned, the resistance changes gradually.

(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:





If the result is not as specified, replace the curtain switch assembly.
HINT: As the circuit has a diode, perform the measurement with the tester in diode mode.





(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the curtain switch assembly.
HINT: As the dial is being turned, the resistance changes gradually.

(d) Measure the voltage according to the value(s) in the table below.
Standard voltage:





If the result is not as specified, replace the curtain switch assembly.
HINT: As the circuit has a diode, perform the measurement with the tester in diode mode.

(e) Check that the climate control switch illuminates.
OK:





If the result is not as specified, replace the curtain switch assembly.