Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY






(a) Install the switch.






(b) Install the 2 screws.






(c) Connect the connector and clamp.
2. INSTALL STEERING PAD Installation

3. INSTALL SWITCH AND VOLUME CASE Installation

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL BATTERY SERVICE HOLE COVER LH Battery

7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

8. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.