Removal

2UR-FSE CHARGING: BATTERY: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Components

3. REMOVE BATTERY






(a) Disconnect the cable from negative (-) battery terminal.
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

(b) Disconnect the cable from positive (+) battery terminal.
(c) Disconnect the thermistor sensor connector.
(d) Disconnect the battery room ventilation hose.
(e) Remove the nut and battery clamp.
(f) Remove the bolt and No. 2 battery hold down clamp.
(g) Remove the battery.






4. REMOVE BATTERY CARRIER
(a) Remove the 3 bolts and battery carrier.