Reading and Clearing Diagnostic Trouble Codes

2UR-FSE STARTING: SMART ACCESS SYSTEM WITH PUSH-BUTTON START: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / (desired system) / DTC INFO.
(2) Techstream - Select: Body Electrical / (desired system) / Trouble codes.
(e) Read the DTCs.
2. CLEAR DTC
(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / (desired system) / DTC INFO.
(2) Techstream - Select: Body Electrical / (desired system) / Trouble codes.
(e) Erase the DTCs.