Reading and Clearing Diagnostic Trouble Codes

STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / TILT & TELESCO / DTC INFO.
(2) Techstream - Select: Body Electrical / Tilt & Telescopic / Trouble Codes.
(e) Read the DTCs.
2. CLEAR DTC
(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / TILT & TELESCO / DTC INFO.
(2) Techstream - Select: Body Electrical / Tilt & Telescopic / Trouble Codes.
(e) Erase the DTCs.