Installation

THEFT DETERRENT: SECURITY HORN ASSEMBLY:

INSTALLATION

1. INSTALL SECURITY HORN ASSEMBLY
(a) Connect the connector.





(b) Install the security horn assembly with the bolt.
Torque: 31 Nm (316 kgf-cm, 23 ft-lbf)
2. INSTALL FRONT SUSPENSION UPPER BRACE CENTER Installation
3. INSTALL ENGINE ROOM SIDE COVER RH Installation
4. INSTALL HOOD HINGE COVER RH Installation
5. INSTALL ENGINE ROOM SIDE COVER LH Installation
6. INSTALL HOOD HINGE COVER LH Installation
7. INSTALL COOL AIR INTAKE DUCT SEAL Installation