Reassembly

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR: REASSEMBLY

REASSEMBLY

1. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH Installation
2. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH
3. INSTALL LUGGAGE COMPARTMENT OUTSIDE DOOR GARNISH SUB-ASSEMBLY (w/o Rear View Monitor System)
4. INSTALL LUGGAGE COMPARTMENT OUTSIDE DOOR GARNISH SUB-ASSEMBLY (w/ Rear View Monitor System)
5. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System) Installation
6. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY Installation
7. INSTALL REAR LIGHT ASSEMBLY LH Installation
8. INSTALL REAR LIGHT ASSEMBLY RH
9. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY





(a) Engage the clamp and guide, and connect the holder.
(b) Engage the 6 clamps and install the luggage door lock control cable sub-assembly.
10. INSTALL LUGGAGE DOOR HINGE ARM PLATE RH
11. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH





(a) Engage the 6 claws and install the luggage compartment door hinge cover RH.
(b) Install the clip.
12. INSTALL LUGGAGE LOCK CONTROL CABLE CLAMP





(a) Engage the clamp and install the luggage lock control cable clamp.
13. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY Installation
14. INSTALL LUGGAGE COMPARTMENT DOOR COVER
15. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE
16. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE
17. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP
18. INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER





(a) Engage the 2 clamps.
(b) Install the luggage compartment front trim cover with double-sided tape.
19. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH





(a) Install the luggage compartment inner trim cover RH with the 3 clips.
20. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH





(a) Install the luggage compartment inner trim cover LH with the 3 clips.
21. INSTALL REAR FLOOR FINISH PLATE





(a) Engage the 4 clips and install the rear floor finish plate.
(b) Install the 3 clips.
22. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK





(a) Install the 2 No. 1 luggage compartment trim hooks with the 2 screws.
23. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY





(a) Install the 2 luggage hold belt striker assemblies with the 2 bolts.
24. INSTALL SPARE WHEEL COVER TRAY
25. INSTALL NO. 2 SPARE WHEEL COVER
26. INSTALL LUGGAGE COMPARTMENT FLOOR MAT