Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH





(a) Engage the 3 claws [A].
(b) Engage the 3 claws [B] and install the No. 2 defroster nozzle garnish as shown in the illustration.
2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH





(a) Engage the 3 claws [A].
(b) Engage the 3 claws [B] and install the No. 1 defroster nozzle garnish as shown in the illustration.
3. INSTALL NO. 1 INSTRUMENT PANEL PIN
(a) Install the 4 No. 1 instrument panel pins with the 4 screws [I].





4. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation
5. INSTALL NO. 1 METER HOOD RETAINER





(a) Install the 2 No. 1 meter hood retainers with the 2 screws [I].
6. INSTALL AUTOMATIC LIGHT CONTROL SENSOR





(a) Engage the 2 claws and install the automatic light control sensor.
7. INSTALL NAVIGATION ANTENNA ASSEMBLY Installation
8. INSTALL NO. 3 INSTRUMENT PANEL WIRE





(a) Engage the 3 clamps.
(b) Connect the connector and install the No. 3 instrument panel wire.
9. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY Installation
10. INSTALL NO. 2 HEATER TO REGISTER DUCT





(a) Install the No. 2 heater to register duct with the 4 screws [F].
11. INSTALL NO. 1 HEATER TO REGISTER DUCT





(a) Install the No. 1 heater to register duct with the 3 screws [F].
12. INSTALL DEFROSTER NOZZLE ASSEMBLY





(a) Install the defroster nozzle assembly with the 3 screws [F].
13. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT





(a) Install the side No. 2 defroster nozzle duct with the 2 screws [F].
14. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT





(a) Install the side No. 1 defroster nozzle duct with the 2 screws [F].