Pinout Values and Diagnostic Parameters

MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK OUTER MIRROR CONTROL ECU LH





(a) Disconnect the E65 and E66 connectors.
(b) Measure the voltage and resistance according to the value(s) in the table below.
Standard voltage:






Standard resistance:





If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the E65 and E66 connectors.
(d) Measure the voltage according to the value(s) in the table below.
Standard voltage:





HINT: *1: with Retract Mirror