Reassembly

SEAT: REAR SEAT ASSEMBLY: REASSEMBLY

REASSEMBLY

1. INSTALL REAR BENCH TYPE SEATBACK COVER
(a) Using hog ring pliers, install 20 new hog rings.




NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

(b) Using hog ring pliers, install the rear bench type seatback cover to the seatback frame (with pad) with 55 new hog rings.




NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

2. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE





(a) Install the rear seat center shoulder belt guide with the 2 screws.
3. INSTALL REAR SEAT SHOULDER BELT GUIDE RH





(a) Install the rear seat shoulder belt guide RH with the 3 screws.
4. INSTALL REAR SEAT SHOULDER BELT GUIDE LH
HINT: Use the same procedure for the RH and LH side.

5. INSTALL REAR SEAT HEADREST SUPPORT
(a) Engage the 6 claws and install the 3 rear seat headrest supports.





6. INSTALL REAR SEAT HEADREST SUPPORT
7. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY





(a) Engage the 2 claws and install the rear center seat armrest assembly with the 2 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
8. INSTALL INNER CENTER SEAT ARMREST PLATE





(a) Engage the 11 claws and install the inner center seat armrest plate.
9. INSTALL REAR BENCH TYPE SEAT CUSHION COVER
(a) Using hog ring pliers, install the rear bench type seat cushion cover to the seat cushion frame (with pad) with 20 new hog rings.




NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, avoid wrinkling the cover.

(b) Using hog ring pliers, install the rear bench type seat cushion cover to the seat cushion frame (with pad) with 33 new hog rings.




NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, avoid wrinkling the cover.