Removal

SEAT: REAR SEAT ASSEMBLY:

REMOVAL

1. REMOVE REAR SEAT CUSHION ASSEMBLY





(a) Detach the 2 front hooks of the rear seat cushion assembly from the vehicle body.
NOTE:
Follow the instructions below carefully as the cushion frame deforms easily.
(1) Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
(2) Repeat for the other hook.
(b) Detach the 2 rear hooks of the seat cushion from the seatback.
(c) Remove the seat cushion.
2. REMOVE REAR SEAT HEADREST ASSEMBLY
3. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY
4. REMOVE REAR SEATBACK ASSEMBLY





(a) Using a screwdriver, detach the claws to open the caps of the rear seat shoulder belt guide RH.
(b) Remove the 3 screws and rear seat shoulder belt guide RH.
HINT:
- Tape the screwdriver tip before use.
- Use the same procedure for the LH side and RH side





(c) Using a screwdriver, detach the claw to open the cap of the rear seat shoulder belt guide.
HINT: Tape the screwdriver tip before use.

(d) Remove the 2 screws and rear seat shoulder belt guide.





(e) Remove the 4 bolts and rear seatback assembly.
(f) Detach the 3 upper hooks of the rear seatback assembly from the vehicle body.