Removal

CRUISE CONTROL: DISTANCE CONTROL ECU:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
3. REMOVE FRONT DOOR SCUFF PLATE RH Removal
4. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
6. REMOVE SIDE INSTRUMENT PANEL RH Removal
7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
8. REMOVE LOWER INSTRUMENT PANEL RH Removal
9. REMOVE DISTANCE CONTROL ECU ASSEMBLY





(a) Remove the 2 nuts and the bolt and disengage the certification ECU with instrument panel wire.





(b) Turn the certification ECU with instrument panel wire in the direction indicated by the arrow.
NOTE:
Do not apply excessive force.

(c) Disconnect the connectors.





(d) Remove the nut and the distance control ECU assembly.