Removal

2GR-FE ENGINE CONTROL SYSTEM: ACTIVE CONTROL ENGINE MOUNT ECU:

REMOVAL

1. PRECAUTION
CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE SIDE INSTRUMENT PANEL RH Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
5. REMOVE FRONT DOOR SCUFF PLATE RH Removal
6. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal
7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
8. REMOVE LOWER INSTRUMENT PANEL RH Removal
9. REMOVE ACTIVE CONTROL ENGINE MOUNT ECU





(a) Disconnect the connector.





(b) Remove the nut and active control engine mount ECU.