Installation

LIGHTING: AUTOMATIC LIGHT CONTROL SENSOR:

INSTALLATION

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR





(a) Engage the 2 claws and install the automatic light control sensor.
(b) Connect the connector.
2. INSTALL NO. 2 HEATER TO REGISTER DUCT Reassembly
3. INSTALL NO. 1 HEATER TO REGISTER DUCT Reassembly
4. INSTALL DEFROSTER NOZZLE ASSEMBLY Reassembly
5. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT Reassembly
6. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT Reassembly
7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/o DVD Player) Installation
8. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/ DVD Player) Installation
9. INSTALL ROOM TEMPERATURE SENSOR Installation
10. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY Installation
11. INSTALL PUSH START SWITCH Installation
12. INSTALL NO. 1 INSTRUMENT PANEL MOUNTING BRACKET Installation
13. INSTALL FRONT STEREO COMPONENT SPEAKER ASSEMBLY Installation
14. INSTALL NO. 1 SPEAKER HOLE COVER Installation
15. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
16. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side) Installation
17. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation
18. INSTALL FRONT PILLAR GARNISH RH Installation
19. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
20. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side) Installation
21. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation
22. INSTALL FRONT PILLAR GARNISH LH Installation
23. INSTALL REAR CONSOLE BOX ASSEMBLY Installation
24. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY Installation
25. INSTALL CONSOLE BOX CARPET Installation
26. INSTALL CONSOLE BOX POCKET Installation
27. INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System) Installation
28. INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System) Installation
29. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Installation
30. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) Installation
31. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
32. INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE Installation
33. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
34. INSTALL LOWER INSTRUMENT PANEL RH Installation
35. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation
36. INSTALL SIDE INSTRUMENT PANEL RH Installation
37. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
38. INSTALL FRONT DOOR OPENING TRIM COVER RH Installation
39. INSTALL FRONT DOOR SCUFF PLATE RH Installation
40. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
41. INSTALL NO. 1 SWITCH HOLE BASE Installation
42. INSTALL COMBINATION METER ASSEMBLY Installation
43. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
44. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE Installation
45. INSTALL TILT & TELESCOPIC SWITCH Installation
46. INSTALL STEERING COLUMN COVER Installation
47. INSTALL SPIRAL CABLE SUB-ASSEMBLY Installation
48. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
49. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
50. INSTALL SIDE INSTRUMENT PANEL LH Installation
51. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
52. INSTALL FRONT DOOR SCUFF PLATE LH Installation
53. INSTALL STEERING WHEEL ASSEMBLY Installation
54. INSTALL STEERING PAD Installation
55. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
56. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
57. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
58. INSPECT STEERING PAD Installation
59. INSPECT SRS WARNING LIGHT Diagnosis System.

60. PERFORM INITIALIZATION
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.