Lighting

LIGHTING: STOP LIGHT SWITCH:

INSTALLATION

1. INSTALL STOP LIGHT SWITCH ASSEMBLY Installation
2. INSTALL COMBINATION METER ASSEMBLY Installation
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
4. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation
5. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
7. INSTALL SIDE INSTRUMENT PANEL LH Installation
8. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
9. INSTALL FRONT DOOR SCUFF PLATE LH Installation
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. INSPECT SRS WARNING LIGHT Diagnosis System.

12. PERFORM INITIALIZATION
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.