Brake

BRAKE: STOP LIGHT SWITCH:

REMOVAL

1. PRECAUTION
CAUTION:
Be sure to read the "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE FRONT DOOR SCUFF PLATE OUTSIDE LH Removal
4. REMOVE INSTRUMENT SIDE PANEL LH Removal
5. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal
6. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal
8. REMOVE FRONT DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal
9. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
10. REMOVE COMBINATION METER Removal
11. REMOVE STOP LIGHT SWITCH





(a) Disconnect the stop light switch connector from the stop light switch.





(b) Turn the stop light switch counterclockwise and remove the stop light switch.