Installation

METER: LIGHT CONTROL RHEOSTAT:

INSTALLATION

1. INSTALL LIGHT CONTROL RHEOSTAT





(a) Engage the 2 claws and install the light control rheostat.
2. INSTALL NO. 1 SWITCH HOLE BASE
(a) Connect each connector.





(b) Engage the 4 clips and install the No. 1 switch hole base.
3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
5. INSTALL SIDE INSTRUMENT PANEL LH Installation
6. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
7. INSTALL FRONT DOOR SCUFF PLATE LH Installation