Installation

LIGHTING: HEADLIGHT ASSEMBLY:

INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY
(a) Connect the connectors.





(b) Install the headlight assembly with the 3 bolts and screw.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. INSTALL HOOD TO FRONT FENDER SEAL
3. INSTALL ENGINE ROOM SIDE COVER Installation
4. INSTALL HOOD HINGE COVER Installation
5. INSTALL FRONT BUMPER ASSEMBLY Installation
6. INSTALL COOL AIR INTAKE DUCT SEAL Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight)
8. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT Adjustments
9. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments
10. PREPARATION FOR HEADLIGHT AIMING (Using a Screen) Adjustments
11. HEADLIGHT AIMING INSPECTION Adjustments
12. HEADLIGHT AIMING ADJUSTMENT Adjustments
13. PERFORM INITIALIZATION (for HID Headlight)
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.