Disassembly
LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: DISASSEMBLY
DISASSEMBLY
1. REMOVE REAR BUMPER RETAINER UPPER
(a) Disengage the claw and remove the rear bumper retainer upper.
2. REMOVE REAR COMBINATION LIGHT GASKET
(a) Remove the rear combination light gasket.
- Be sure to remove all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.
3. REMOVE REAR SIDE MARKER LIGHT BULB
(a) Turn the rear side marker light bulb and the rear combination light socket and wire sub-assembly in the direction indicated by the arrow and remove them as a unit.
(b) Remove the rear side marker light bulb from the rear combination light socket and wire sub-assembly.
4. REMOVE REAR TURN SIGNAL LIGHT BULB
(a) Turn the rear turn signal light bulb and the rear combination light socket and wire sub-assembly in the direction indicated by the arrow and remove them as a unit.
(b) Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.
5. REMOVE TAIL AND STOP LIGHT BULB
(a) Turn the tail and stop light bulb and the rear combination light socket and wire sub-assembly in the direction indicated by the arrow and remove them as a unit.
(b) Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly.
6. REMOVE REAR LIGHT GASKET
(a) Remove the rear light gasket.
- Be sure to remove all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.
7. REMOVE BACK UP LIGHT BULB
(a) Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.
(b) Remove the back up light bulb from the rear light socket and wire.
8. REMOVE TAIL LIGHT BULB
(a) Turn the tail light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.
(b) Remove the tail light bulb from the rear light socket and wire.