Removal

AXLE: REAR AXLE HUB AND BEARING:

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY Removal
3. REMOVE REAR DISC Disassembly
4. DISCONNECT SKID CONTROL SENSOR CONNECTOR Removal
5. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY
(a) Disconnect the skid control sensor connector.





(b) Remove the 4 bolts and hub and bearing assembly.