Skid Control Sensor

BRAKE CONTROL: SKID CONTROL SENSOR: INSPECTION

INSPECTION

1. INSPECT SKID CONTROL SENSOR
(a) Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one:
- The surface of the skid control sensor is cracked, dented, or chipped off.
- The connector is scratched, cracked, or damaged.
- The skid control sensor has been dropped.





(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
RH





LH





If the value is not as specified, replace the skid control sensor.