Installation

LIGHTING: HEADLIGHT DIMMER SWITCH:

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY





(a) Engage the claw while loosening the clamp as shown in the illustration.





(b) Install the headlight dimmer switch assembly with the clamp.
(c) Connect the connector.
2. INSTALL TILT AND TELESCOPIC SWITCH Installation
3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation
4. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR Installation
5. INSTALL STEERING COLUMN COVER Installation
6. ADJUST SPIRAL CABLE Installation
7. INSTALL STEERING WHEEL ASSEMBLY Installation
8. INSPECT STEERING WHEEL CENTER POINT
9. INSTALL STEERING PAD Installation
10. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
11. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13. INSPECT STEERING PAD Installation
14. INSPECT SRS WARNING LIGHT Diagnosis System

15. PERFORM INITIALIZATION
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.