Installation

SUSPENSION: FRONT SUSPENSION LOWER NO. 1 ARM:

INSTALLATION

1. INSTALL FRONT SUSPENSION LOWER NO. 1 ARM
(a) Install the front lower arm bushing stopper.
(b) Install the front suspension lower No. 1 arm to the front frame assembly with the 3 bolts and the nut, but do not tighten them yet.





(c) Tighten the 3 bolts in numerical order shown in the illustration.
Torque: 200 Nm (2,040 kgf-cm, 148 ft-lbf)
Torque: 206 Nm (2,100 kgf-cm, 152 ft-lbf)
2. INSTALL ENGINE MOUNTING INSULATOR





(a) Install the engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft-lbf)
3. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
HINT: Refer to the instructions for removal of the engine assembly Installation.