Repair Instruction - Customize Parameters

INTRODUCTION: REPAIR INSTRUCTION: CUSTOMIZE PARAMETERS

CUSTOMIZE PARAMETERS

1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

Tilt&Telescopic:





2. AIR CONDITIONING SYSTEM

AIR CONDITIONER:





3. THEFT DETERRENT SYSTEM

Security:





HINT: *: for North America

4. LIGHTING SYSTEM

Illuminated Entry:





Light Control:





5. POWER DOOR LOCK CONTROL SYSTEM

Door Lock:





*1: for Brazil
*2: for Korean and Brazil

Wireless D Lock:





6. WIRELESS DOOR LOCK CONTROL SYSTEM

Main Body ECU





7. SMART ACCESS SYSTEM WITH PUSH-BUTTON START (DOOR LOCK)

Smart:





Wireless Door Lock:





Warning:





8. ENTRY UNLOCK MODE SWITCHING FUNCTION
(a) To change the vehicle to entry unlock mode switching function, make sure the vehicle power is off and simultaneously press and hold the electrical key's LOCK switch and another electrical key switch for 4.5 seconds.
- When the switches are pressed and held for 4.5 seconds, the entry door unlock mode changes in the following order: driver door mode, all door mode.
NOTE:
After pressing and holding the switches for 4.5 seconds, wait 4.5 seconds before performing the same procedure again.
- Driver door unlock mode:
When the driver door's touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.
- All door unlock mode:
When the touch sensor is touched, all doors unlock.

(b) The certification ECU receives this signal from the entry door control receiver and changes the smart access system with push-button start to the entry unlock mode.
(c) The certification ECU sounds the buzzers of the wireless door lock buzzer and combination meter to inform the user that the mode has been switched.




HINT: The function only changes the entry unlock mode of the smart access system with push-button start. It does not switch the unlocking of the wireless door lock control.

9. ELECTRICAL KEY CANCEL
The electrical key cancel operation disables the following functions:

- Entry Unlock/Lock
- Entry Luggage Compartment Open
- Electrical Key Lock-in Prevention
- Warning
- Memory Call

(a) The operation procedures are as follows:
Precondition:
Engine switch off, driver side door closed and unlocked.
(1) Unlock the driver side door once with the UNLOCK switch of the electrical key.
(2) Open the driver door within 5 seconds.
(3) Unlock the driver side door twice with the UNLOCK switch of the electrical key within 5 seconds.
(4) Close and open the driver door twice within 30 seconds.
(Driver door: Close -> Open -> Close -> Open)
(5) Unlock the driver side door twice with the UNLOCK switch of the electrical key within 5 seconds.
(6) Close and open the driver door within 30 seconds.
(Driver door: Close -> Open)
(7) Close the driver door within 5 seconds.
When electrical key cancel is activated, the wireless door lock buzzer sounds twice.
To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.
10. METER/GAUGE SYSTEM

Combination Meter:





HINT: *: This setting is only valid for the buzzer which sounds at the 20 km/h (12 mph) or more.

11. INTUITIVE PARK ASSIST SYSTEM

Warning





Sensor:





Display:





12. POWER MIRROR CONTROL SYSTEM (WITH MEMORY)

Mirror





13. REAR SUNSHADE SYSTEM

Others





14. SLIDING ROOF SYSTEM

Sliding roof ECU