Pinout Values and Diagnostic Parameters

WIPER AND WASHER: WIPER AND WASHER SYSTEM (w/ Rain Sensor): TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK WINDSHIELD WIPER RELAY ASSEMBLY (AUTO WIPER RELAY)





(a) Disconnect the E11 relay connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the E11 relay connector.
(d) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, the relay may have a malfunction.