Removal

WIPER AND WASHER: WIPER RELAY:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
3. REMOVE FRONT DOOR SCUFF PLATE RH Removal
4. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
6. REMOVE SIDE INSTRUMENT PANEL RH Removal
7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
8. REMOVE LOWER INSTRUMENT PANEL RH Removal
9. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY





(a) Disconnect the connector.
(b) Remove the nut and the windshield wiper relay assembly.