Removal

EXTERIOR: REAR BUMPER: REMOVAL

REMOVAL

1. REMOVE REAR BUMPER NO. 1 PLATE





(a) Using a screwdriver, disengage the 2 claws.
- Tape the screwdriver tip before use.
- Use the same procedure for the RH side and LH side.

(b) Remove the rear bumper No. 1 plate.
HINT: Use the same procedure for the RH side and LH side.

2. REMOVE REAR BUMPER ASSEMBLY (w/o Intuitive Parking Assist System)





(a) Put protective tape around the rear bumper assembly.
HINT: Use the same procedure for the RH side and LH side.





(b) Remove the 4 clips and 6 screws.
(c) Remove the 2 rear bumper seal brackets.





(d) Pull the rear bumper assembly to detach the 7 claws.
HINT: Use the same procedure for the RH side and LH side.

(e) Remove the rear bumper assembly.
3. REMOVE REAR BUMPER ASSEMBLY (w/ Intuitive Parking Assist System)





(a) Put protective tape around the rear bumper assembly.
HINT: Use the same procedure for the RH side and LH side.





(b) Remove the 4 clips and 6 screws.
(c) Remove the 2 rear bumper seal brackets.





(d) Pull the rear bumper assembly to detach the 7 claws.
HINT: Use the same procedure for the RH side and LH side.





(e) Disconnect the 4 ultrasonic sensor connectors and 4 clamps.
(f) Remove the rear bumper assembly.
4. REMOVE REAR BUMPER ENERGY ABSORBER





(a) Remove the rear bumper energy absorber.
5. REMOVE REAR BUMPER BAR





(a) Remove the rear bumper bar from the rear bumper energy absorber.
6. REMOVE REAR BUMPER ARM REINFORCEMENT LH





(a) Disengage the 3 claws and 3 guides, and remove the rear bumper arm reinforcement LH.
7. REMOVE REAR BUMPER ARM REINFORCEMENT RH
HINT: Use the same procedure for the RH side and LH side.

8. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY





(a) Remove the 8 bolts and rear bumper reinforcement sub-assembly.
9. REMOVE REAR BUMPER NO. 2 SIDE SUPPORT LH





(a) Remove the 4 screws and detach the 2 claws to remove the rear bumper No. 2 side support LH.
10. REMOVE REAR BUMPER NO. 2 SIDE SUPPORT RH
HINT: Use the same procedure for the RH side and LH side.

11. REMOVE REAR BUMPER UPPER RETAINER LH





(a) Remove the screw and detach the claw to remove the rear bumper upper retainer LH.
12. REMOVE REAR BUMPER UPPER RETAINER RH
HINT: Use the same procedure for the RH side and LH side.