Removal

BRAKE CONTROL: BRAKE CONTROL POWER SUPPLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
(a) Remove the floor mat.
3. REMOVE LUGGAGE COMPARTMENT NO. 1 TRIM COVER
(a) Remove the trim cover.
4. REMOVE ROPE HOOK ASSEMBLY
(a) Remove the 2 bolts and 2 rope hooks.
5. REMOVE REAR FLOOR FINISH PLATE
(a) Remove the 3 clips and finish plate.
6. REMOVE ROPE HOOK
(a) Remove the 2 rope hooks.
7. REMOVE LUGGAGE COMPARTMENT NO. 2 TRIM HOOK
(a) Remove the 2 trim hooks.
8. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
(a) Remove the 4 clips and trim cover.
9. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER RH
(a) Remove the bolt and rope hook.
(b) Remove the 2 clips and trim cover.
10. REMOVE BRAKE CONTROL POWER SUPPLY ASSEMBLY
(a) Disconnect the connector.





(b) Remove the 3 nuts and brake control power supply.
(c) Remove the 4 bolts and 2 brackets.