Installation

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: INSTALLATION

INSTALLATION

1. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(a) Engage the 5 clips to install the instrument panel safety pad sub-assembly.
(b) Connect the connectors and clamps.
(c) Install the 2 bolts to the passenger airbag.
Torque: 20 Nm (204 kgf-cm, 15ft-lbf)
(d) Install the 4 bolts, nut and 2 clips.
(e) Install the center junction block RH and LH with the 4 nuts.









(f) w/ Navigation System:
Install the navigation ECU.
(1) Connect the connector.
(2) Install the ECU with the 3 bolts.
2. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation
3. INSTALL FRONT PILLAR GARNISH LH Installation
4. INSTALL FRONT PILLAR GARNISH RH Installation
5. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY





(a) Engage the 2 clips and claw to install the glove compartment door sub-assembly.
(b) Connect the connector and clamp.
(c) Install the 4 screws.
6. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation
7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY





(a) Connect the connector and clamp.
(b) Engage the 4 clips to install the No. 2 instrument panel under cover sub-assembly.
8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY





(a) Connect the connector.
(b) Engage the 2 claws to install the integration control and panel assembly.
(c) Install the 2 screws.
9. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation
10. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY





(a) Connect the connector.
(b) Install the hood lock control cable to the No. 1 instrument panel safety pad sub-assembly.
(c) Engage the 3 clips and 5 claws to install the safety pad.
11. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY





(a) Connect the connectors.
(b) Engage the 3 claws.
(c) Install the No. 1 instrument panel under cover sub-assembly with the 2 screws.
12. INSTALL INSTRUMENT SIDE PANEL LH





(a) Engage the 2 claws and 4 clips to install the instrument side panel LH.
13. INSTALL INSTRUMENT SIDE PANEL RH





(a) Engage the 2 claws and 4 clips to install the instrument side panel RH.
14. INSTALL COMBINATION METER ASSEMBLY





(a) Connect the connector.
(b) Install the combination meter assembly with the 4 screws.
15. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY





(a) Connect the connector.
(b) Engage the 5 clips to install the instrument cluster finish panel sub-assembly.
16. INSTALL CONSOLE BOX ASSEMBLY





(a) Connect the connector.
(b) Install the console box assembly with the 4 bolts and 2 screws.
17. INSTALL CONSOLE BOX REGISTER ASSEMBLY





(a) Engage the 4 clips to install the console box register assembly.
18. INSTALL CONSOLE BOX PLATE





(a) Connect the connector.
(b) Engage the 4 clips to install the console box plate.





19. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
(a) Engage the 4 clips and 3 claws to install the instrument panel finish panel end LH.
(b) Install the screw.
20. INSTALL INSTRUMENT PANEL FINISH PANEL END RH





(a) Engage the 3 clips and 3 claws to install the instrument panel finish panel end RH.
(b) Install the screw.
21. INSTALL CONSOLE UPPER PANEL ASSEMBLY





(a) Connect the connector.
(b) Engage the 9 clips to install the console upper panel assembly.





(c) Install the shift lever knob and turn it in the direction indicated by the arrow.
22. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
(a) Engage the claws to install the front console upper panel garnish.
23. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY Installation
24. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation
25. INSTALL SPIRAL CABLE WITH STEERING SENSOR Installation
26. INSTALL UPPER STEERING COLUMN COVER Installation
27. INSTALL LOWER STEERING COLUMN COVER Installation
28. INSTALL STEERING WHEEL ASSEMBLY Installation
29. INSTALL STEERING PAD Installation
30. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
31. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
32. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
33. INSTALL FRONT DOOR OPENING TRIM COVER RH Installation
34. INSTALL FRONT DOOR SCUFF PLATE LH Installation
35. INSTALL FRONT DOOR SCUFF PLATE RH Installation
36. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

37. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.