Installation

METER: COMBINATION METER: INSTALLATION

INSTALLATION

1. INSTALL COMBINATION METER GLASS

(a) Engage the 7 claws to install the combination meter glass.

(b) Install the combination meter glass's wire harness with the clamps.

(d) Close the cover and engage the 2 claws.
2. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector.
(b) Install the combination meter assembly with the 4 screws.
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Connect the connector.
(b) Engage the 5 clips to install the instrument cluster finish panel sub-assembly.
4. INSTALL UPPER STEERING COLUMN COVER Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.