Customize Parameters

METER: METER / GAUGE SYSTEM: CUSTOMIZE PARAMETERS

CUSTOMIZE PARAMETERS

1. BUZZER ON / OFF SETTING
(a) The combination meter's buzzer operation can be customized. There is an ON and OFF setting, which sets or disables the driver's and / or front passenger's seat belt buzzer.
NOTICE:
These buzzers should be set to ON as a safety precaution. If it is necessary to customize the buzzers, perform the procedures below.

Procedure





HINT: The buzzer cancel mode ends when either of the following is performed: 1) the ODO/TRIP switch is not operated for 10 seconds, or 2) the power switch is turned OFF.

2. CUSTOMIZE PARAMETERS (Using the Techstream)
HINT: The following items can be customized.
NOTICE:
Be sure to record the current value before customizing.

Combination meter