Programming and Relearning
LIGHTING: LIGHTING SYSTEM: CUSTOMIZE PARAMETERS
CUSTOMIZE PARAMETERS
HINT: The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a mote of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
Illuminated entry
HINT: Sensitivity adjustment can hardly be confirmed. Check by driving the customer's vehicle.
Light control
HINT: *:Except Canada
Illustration*1
Illustration*2
Illustration*3
HINT: *4: When customizing the foot light, make sure the driver seat and front passenger seat are set to the same setting.
1. Door linked personal light illumination control
Mode 1: When door is opened, personal light of opened door illuminates
Mode 2: When door is opened, both front personal lights and rear personal lights illuminate
Mode 3: Front personal lights and rear personal lights are not linked to doors
(a) ->->->To change modes, press the map light assembly DOOR and ON switch simultaneously, and then turn the power switch from off to on (IG). Each this operation will change the mode (Mode 1 Mode 2 Mode 3 Mode 1).
HINT: After changing modes, the front personal lights respond by blinking as follows:
- Mode 1: once
- Mode 2: twice
- Mode 3: three times
2. Map light assembly ON switch linked illumination control
- Mode 4: When map light assembly ON switch is pressed, front personal lights, rear personal lights, front seat lights and rear seat lights illuminate
- Mode 5: When map light assembly ON switch is pushed, front seat lights and rear seat lights illuminate
(a) ->->To change modes, press the map light assembly ON, DOOR and OFF switches simultaneously, and then turn the power switch from off to on (IG). Each this operation will change the mode (Mode 4 Mode 5 Mode 4).
HINT: After changing modes, the front personal lights responds by blinking as follows:
- Mode 4: four times
- Mode 5: five times