Removal

2GR-FSE FUEL: FUEL PRESSURE SENSOR: REMOVAL

REMOVAL

1. PRECAUTION Removal
2. DISCHARGE FUEL SYSTEM PRESSURE Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

4. REMOVE SERVICE PLUG GRIP Removal
5. REMOVE COOL AIR INTAKE DUCT SEAL Removal
6. REMOVE ENGINE ROOM SIDE COVER LH Removal
7. REMOVE ENGINE ROOM SIDE COVER RH Removal
8. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
9. REMOVE FRONT UPPER FENDER PROTECTOR LH Removal
10. REMOVE FRONT UPPER FENDER PROTECTOR RH Removal
11. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal
12. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal
13. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
14. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
15. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal
16. DRAIN ENGINE COOLANT Service and Repair
17. DISCONNECT NO. 2 VENTILATION HOSE Removal
18. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal
19. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY Removal
20. REMOVE INTAKE AIR SURGE TANK Removal
21. REMOVE INTAKE MANIFOLD Removal
22. DISCONNECT WATER HOSE JOINT Removal
23. REMOVE NO. 1 FUEL PIPE Removal





24. REMOVE FUEL PRESSURE SENSOR
(a) Disconnect the connector and clamp.
(b) Remove the fuel pressure sensor and gasket.