Removal

1UR-FSE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE ENGINE ROOM SIDE COVER RH Removal
4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
5. REMOVE MASS AIR FLOW METER





(a) Disconnect the mass air flow meter connector.





(b) Remove the 2 screws and mass air flow meter.