Removal

1UR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING CONTROL MOTOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE ENGINE ROOM SIDE COVER LH Removal
4. REMOVE ENGINE ROOM SIDE COVER RH Removal
5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
6. REMOVE NO. 1 AIR CLEANER INLET Removal
7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
9. REMOVE CAMSHAFT TIMING CONTROL MOTOR RH





(a) Disconnect the 2 camshaft timing control motor connectors and 2 clamps.





(b) Remove the bolt and engine wire bracket.





(c) Remove the 3 bolts and camshaft timing control motor.
(d) Remove the O-ring from the timing chain cover.
10. REMOVE CAMSHAFT TIMING CONTROL MOTOR LH





(a) Disconnect the 2 camshaft timing control motor connectors and 2 engine wire clamps.





(b) Remove the bolt and engine wire bracket.





(c) Remove the 3 bolts and camshaft timing control motor.
(d) Remove the O-ring from the timing chain cover.