Removal

NAVIGATION: NAVIGATION ECU: REMOVAL

REMOVAL

1. EJECT MAP DISC
(a) Turn the engine switch on (ACC).





(b) Apply protective tape to the places shown in the illustration.





(c) Insert 2 precision screwdrivers (dia1.5 or less) into the holes on both sides of the clock assembly at the angle shown in the illustration.
NOTE:
Do not pry on the clock assembly with the screwdrivers as it may damage the clock assembly.
HINT:
If precision screwdrivers are not available, use in-vehicle tools (part No. 09135-53010).





(d) Insert a protective taped screwdriver from the underside of the hazard switch and pull and remove the clock assembly.
- Do not pry on the hazard switch with the screwdriver as it may damage the switch.

(e) Remove the 2 precision screwdrivers.
(f) Push the "MENU" button.
(g) Touch "Map DVD" on the navigation screen.
(h) Touch "EJECT DVD" on the navigation screen to eject the map disc.
(i) Temporarily reinstall the clock assembly to make the removal of the multi-display assembly easier.
NOTE:
Do not install the clock assembly completely because it will be removed later.

(j) Turn the engine switch off.
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Removal
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Removal
4. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Removal
5. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Removal
6. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Removal
7. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Removal
8. REMOVE FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Removal
9. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY Removal
10. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal
11. REMOVE CONSOLE BOX Removal
12. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
13. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Removal
14. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY Removal
15. REMOVE NO. 1 RADIO BRACKET Removal
16. REMOVE NO. 2 RADIO BRACKET Removal
17. REMOVE MULTI-DISPLAY ASSEMBLY





(a) Slide the multi-display in the direction shown by the arrow to remove the multi-display assembly.
18. REMOVE NAVIGATION ECU





(a) Disconnect the connectors.





(b) Remove the 4 bolts and navigation ECU.