Reassembly

SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): REASSEMBLY

REASSEMBLY

1. INSTALL VERTICAL ADJUSTER SPACER





(a) Engage the clip and install the vertical adjuster spacer.
2. INSTALL SEAT POSITION AIRBAG SENSOR (for Driver Side) Reassembly
3. INSTALL FRONT SEAT CUSHION SHIELD LOWER LH





(a) Engage the claw and install the seat cushion shield lower LH.
4. INSTALL FRONT SEAT CUSHION SHIELD LOWER RH
HINT:
Use the same procedures described for the LH side.

5. INSTALL RECLINING ADJUSTER INSIDE COVER LH





(a) Install the reclining adjuster inside cover LH with the screw.
6. INSTALL RECLINING ADJUSTER INSIDE COVER RH
HINT:
Use the same procedures described for the LH side.

7. INSTALL SEAT RECLINING ADJUSTER INSIDE COVER LH





(a) Engage the claw.
(b) Install the reclining adjuster inside cover LH with the screw.
8. INSTALL SEAT RECLINING ADJUSTER INSIDE COVER RH
HINT:
Use the same procedures described for the LH side.

9. INSTALL FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)





(a) Using a tacker, install the front seatback heater to the end of the seat cover with the tack pins.
10. INSTALL FRONT SEATBACK CUSHION COVER





(a) Using hog ring pliers, install the front seatback cover to the front seatback pad with new hog rings.
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

11. INSTALL FRONT SEATBACK COVER WITH PAD
12. INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY





(a) Engage the 4 claws and install the front seat headrest support assemblies.
13. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)





(a) Using a tacker, install the front seat cushion heater to the end of the seat cover with the tack pins.
14. INSTALL FRONT SEAT CUSHION COVER





(a) Using hog ring pliers, install new hog rings.
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.





(b) Using hog ring pliers, install the front seat cushion cover with new hog rings.
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.





15. INSTALL OCCUPANT CLASSIFICATION ECU (for Front Passenger Side)
(a) Install the ECU with the 2 bolts.
(b) Connect the connector.
16. INSTALL OCCUPANT CLASSIFICATION SENSOR (for Front Passenger Side)





(a) Install the sensor with the 2 clips.





(b) Connect the connector.
- Make sure the gel mat hose is closer to the floor than the main harness
- When setting the hose, make sure the hose is not twisted. 1 full twist or more will damage the hose.
- Make sure the radius of the circular path of the hose is 20 mm (0.787 in.) or more.

(c) Attach the connector clamp.
NOTE:
Do not bend the pressure hose.

17. INSTALL FRONT SEAT CUSHION COVER WITH PAD





(a) Install the hooks and front seat cushion cover with pad.
18. INSTALL FRONT SEAT INNER CUSHION SHIELD





(a) Engage the 2 claws and clip.
(b) Install the front seat inner cushion shield with the screw.
19. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation
20. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Seat)





(a) Engage the claw and clip.
(b) Install the front seat cushion shield with the screw.
21. INSTALL RECLINING ADJUSTER RELEASE HANDLE





(a) Engage the claw and install the reclining adjuster release handle.
22. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Seat)





(a) Install the vertical adjusting handle with the 2 screws.
23. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP (for Driver Seat)





(a) Engage the 3 claws and install the vertical seat adjuster knob cap.
24. INSTALL VERTICAL SEAT ADJUSTER KNOB (for Driver Seat)