Door Courtesy Light

LIGHTING: DOOR COURTESY LIGHT: INSPECTION

INSPECTION

1. INSPECT DOOR COURTESY LIGHT





(a) Disconnect the connector from the door courtesy light.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:

LH Side:





RH Side:





If the result is not as specified, repair or replace the wire harness or connector.





(c) Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
(d) Check that the door courtesy light comes on.
OK:
Comes on
If the result is not as specified, replace the door courtesy light.