Removal

LIGHTING: HIGH INTENSITY DISCHARGE HEADLIGHT BULB: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE ENGINE ROOM SIDE COVER LH (for LH Side) Removal
4. REMOVE ENGINE ROOM SIDE COVER RH (for RH Side) Removal
5. REMOVE WASHER HOSE (for LH Side)





(a) Remove the bolt and washer hose.
6. REMOVE NO. 1 HEADLIGHT BACK COVER





(a) Remove the headlight No. 1 headlight back cover as shown in the illustration.
7. REMOVE NO. 1 HEADLIGHT COVER GASKET
(a) Remove the No. 1 headlight cover gasket.
NOTE:
After the No. 1 headlight cover gasket is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.

8. REMOVE DISCHARGE HEADLIGHT BULB





(a) Separate the light control ECU socket as shown in the illustration.





(b) Release the set spring and remove the discharge headlight bulb as shown in the illustration.
NOTE:
After the discharge headlight bulb is replaced, make sure that it comes on. Then, reinstall all the parts that were removed to replace the bulb.