Disassembly

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: DISASSEMBLY

DISASSEMBLY

1. REMOVE REAR TURN SIGNAL LIGHT BULB





(a) Turn the rear turn signal light bulb and the rear light socket and wire in the direction indicated by the arrow and disconnect them as a unit.
(b) Remove the rear turn signal light bulb from the rear light socket and wire.
2. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE





(a) Disconnect the connector and remove the rear combination light socket and wire.
3. REMOVE REAR COMBINATION LIGHT BODY GASKET





(a) Remove the rear combination light body gasket from the rear combination light lens and body.
- Be sure to remove all the traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.

4. REMOVE REAR LIGHT GASKET





(a) Remove the 3 rear light gaskets.
5. REMOVE BACK UP LIGHT BULB





(a) Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow and remove them as a unit.
(b) Remove the back up light bulb from the rear light socket and wire.
6. REMOVE REAR LIGHT SOCKET AND WIRE





(a) Disconnect the connector.
(b) Disengage the 2 clamps and remove the rear light socket and wire.
7. REMOVE REAR LIGHT GASKET





(a) Remove the rear light gasket from the rear light lens.
- Be sure to remove all the traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.