Connecting Rod, Engine

Connecting rod diameter
Mark1 56.000 to 56.006 mm (2.2047 to 2.2050 in.)
Mark2 56.007 to 56.012 mm (2.2050 to 2.2052 in.)
Mark3 56.013 to 56.018 mm (2.2052 to 2.2054 in)
Mark4 56.019 to 56.024 mm (2.2055 to 2.2057 in.)

Connecting rod thrust clearance
Standard 0.15 to 0.40 (0.0059 to 0.0157 in.)
Maximum 0.50 mm (0.020 in.)

Connecting rod out-of alignment
Maximum 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)

Connecting rod twist
Maximum 0.15 mm (0.0059 in.) per 100 mm (3.94 in.)

Connecting rod cap x Connecting rod
1st Pass: 40 Nm (408 kgf-cm, 30 ft.lbf)
2nd Pass: Turn 90°