Reassembly

RA62 MANUAL TRANSMISSION: OUTPUT SHAFT: REASSEMBLY

REASSEMBLY

1. INSTALL OUTPUT SHAFT FRONT BEARING





(a) Using SST and a press, install a new output shaft front bearing onto the output shaft.
SST: 09710-20011
09710-06061
SST: 09950-60010
09951-00650
(b) Apply a light coat of grease to the bearing.
2. INSTALL OUTPUT SHAFT CENTER BEARING
(a) Apply gear grease to the output shaft center bearing, and install it onto the output shaft.
3. INSTALL NO. 3 SYNCHRONIZER RING
(a) Apply gear oil to the No. 3 synchronizer ring, and install it onto the output shaft.