Audio and Visual System

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 5C-40: Camera Picture Error

DTC 5C-40 - Camera Picture Error

CAUTION / NOTICE / HINT
HINT: If the navigation type is NAVIGATION SYSTEM (for HDD), "multi-display" refers to the "display and navigation assembly".

DESCRIPTION





WIRING DIAGRAM





INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.

PROCEDURE

1.
CHECK HARNESS AND CONNECTOR (DISPLAY AND NAVIGATION ASSEMBLY[MULTI-DISPLAY] - TELEVISION CAMERA)




(a) Disconnect the L60 display connector.
(b) Disconnect the S35 camera connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK DISPLAY AND NAVIGATION ASSEMBLY [MULTI-DISPLAY] (CA+ VOLTAGE)




(a) Measure the voltage according to the value(s) in the table below.
Standard voltage:










D -- REPLACE MULTI-DISPLAY
C -- REPLACE MULTI-DISPLAY
B -- REPLACE DISPLAY AND NAVIGATION ASSEMBLY
A -- REPLACE TELEVISION CAMERA ASSEMBLY